A modern glass deck railing look that maintains open sightlines while clearly defining deck edges, balconies, and elevated outdoor spaces.

Designed as a coordinated glass baluster railing system with consistent component fit across runs, corners, and transitions.

Supports typical 36 in. residential and 42 in. commercial guard height configurations, subject to local building code requirements and project conditions.

Glass balusters are spaced at approximately 3-3/4 in. on center to support common guard opening limitations requiring openings of less than 4 in.

Glass balusters can be positioned closer together within the frame, and aluminum railing sections are designed to be trimmed from standard 6 ft or 8 ft lengths to accommodate a wide range of deck opening sizes.

Utilizes 1/4 in. tempered safety glass balusters commonly accepted for deck railing applications where laminated glass is not required by local jurisdiction.

Materials selected for exterior deck environments where weather exposure, moisture, and long-term durability are critical considerations.

Appropriate for residential decks, multi-family projects, and light commercial applications requiring glass baluster deck railing systems.

For applications requiring custom heights or laminated safety glass, glass panel railing systems are available that omit balusters and utilize full glass infill panels.

Building code requirements vary by municipality and application. Always verify local code requirements, including glass type and guard height, prior to final specification.

8 in. wide x 1/4 in. thick tempered safety glass balusters with polished edges are used as the primary infill element throughout the glass baluster deck railing system.

Structural 3 in. x 3 in. square aluminum posts that support glass balusters and define railing sections for deck, balcony, and stair applications.

Aluminum rail components designed to secure glass balusters consistently while maintaining clean sightlines and system alignment.

System-matched mounting components that hold glass balusters at consistent spacing and alignment throughout the railing run.

Components designed to accommodate level direction changes and terminations are included. Stair transitions and elevation changes require the use of stair and pivot kits.

Offered in standard powder-coated finish options designed to coordinate with surrounding architecture and other Madden Industries railing product lines.

Supplemental components such as spacers, attachment hardware, and layout-specific parts that support proper spacing, alignment, and installation planning.